|
 |
 |
AXIS 5400+
Print Server
Axis Communications, Inc.
|
19 Jun 2003
70029 |
| Tested and Approved with the following Novell products: |
| The AXIS 5400+ is based on Axis RISC processor, ETRAX 100, an integral part of AXIS' ThinServer technology. Pocket Sized, High-Performance Multiprotocol, 10/100 autosensing Print Server for Ethernet Networks, the AXIS 5400+ offers advanced TCP/IP support and provides excellent printing flexibility. Support for IPP enables easy printing over WAN networks. To improve throughput, the AXIS 5400+ supports the IEEE 1284 ECP mode allowing more than 1 Mbps in NetWare environment. It supports Novell NetWare including NDS (QMS printing over IP/IPX), NDPS in both IP and IPX environment and iPrint. The Level 3 support for Netware Packet Signature is an improved security feature. E-mail Notification support when printer needs assistance. Furthermore, it supports advanced Web based management (in 4 languages - English, Spanish, French and German) using any standard Web browser or via AXIS ThinWizard. | |
| Product/Model/Rev | AXIS 5400+/AXIS 5400+/Rev. 6.33 | |
| Application Type | Print Server | |
| NDPS Gateway | Novell | |
| Printer Configuration Software | AXIS NetPilot, AXIS ThinWizard, any standard Web Browser | |
| Printer Driver | IBM Infoprint 1125 PS3 | |
| Printer Interfaces | Bi-directional Parallel | |
| Centronics | |
| Ethernet 100Base-T | |
| Ethernet 10Base-T | |
| IEEE 1284 | |
| Parallel | |
| RJ-45 | |
| Tested Printer Modes | LPR/LPD | |
| QServer-Mode | |
| Remote (RP) | |
| Tested Transport Protocol | IPX | |
| SPX | |
| TCP | |
| Printing Languages | PCL 5e | |
| PCL 6 | |
| PostScript II | |
| PostScript III | |
|
The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact: | |
| Axis Communications, Inc. |
| Emdalavagen 14 |
| Lund S-223 69 |
| SWEDEN |
| Voice: 46-46-272-1800 |
| Fax: 46-46-13 61 30 |
| Website: www.axis.com |
|