KM-7530
Printer
Kyocera Corporation
8 Apr 2003
69570
Tested and Approved with the following Novell products:
NetWare 5.1 NetWare 6

Product Description
The Kyocera Mita KM-7530 is a 75 page per minute, 11x17 (A3 metric size) copier with an optional print controller. When the optional print controller is installed, the KM-7530 becomes a network ready, 600 dpi, monochrome laser printer/copier with a powerful 400 MHz PowerPC 750 processor and 32MB of standard memory (upgradeable to 288MB). PCL XL 2.0, PCL 5E and KPDL3 (PostScript Level 3 emulation) printer emulations are supported. A variety of options are available for the KM-7530, such as a high capacity sidedeck, booklet finisher and multi-tray. The fast high quality printing and copying, and available options make the KM-7530 an excellent departmental printer/copier.

Test Configuration
Product/Model/RevKM-7530/Rev. KM-7530
Application TypePrinter
NDPS GatewayKyocera 1.2.4.3
Printer DriverKyocera Mita KM-7530 KX
Printer InterfacesBi-directional Parallel
Ethernet 100Base-T
Ethernet 10Base-T
IEEE 1284
RJ-45
RS-232C Serial 25-pin
Printer TypeCopier/Printer
Tested Printer ModesLPR/LPD
QServer-Mode

Configuration Note(s)
Print Driver Download Was Successfully Tested On Windows 2000
Print Driver Download Was Successfully Tested On Windows 9X
Print Driver Download Was Successfully Tested On Windows NT4
Print Driver Download Was Successfully Tested On Windows XP

The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Kyocera Corporation
2-14-9 Tamagawadai
Setagaya-ku
Tokyo 158-8610
JAPAN
Voice: 03-3708-3858
Toll Free: 03-3708-0423
Website: www.kyocera.com