Infotec NDPS Gataway 2.00
NDPS Gateway
Danka Business Systems PLC
17 Jul 2002
67290
Tested and Approved with the following Novell products:
NetWare 6 Support Pack 1 for NetWare 6

Product Description
This product provides NDPS (Novell Distributed Print Services) printing and with print accounting services to the supported infotec printer models. Supported infotec printers on the network over IP and IPX can be discovered and listed for user selection. Detect events and generate messages to the users. Receive the SNMP (Simple Network Management Protocol) trap message from the printers and report the front panel message and events of the printer

Test Configuration
Product/Model/RevInfotec NDPS Gataway 2.00/Rev. 2.00
Application TypeNDPS Gateway
Location Validation PerformedOnsite
Printer Driverinfotec 4353 MF PCL 5e
Required Hard Drive Space1 MB
Required RAM128 MB
Tested Printer ModesLPR/LPD
QServer-Mode
Remote (RP)

Configuration Note(s)
LPR/LPD printer used during testing: infotec 4353 MF by RICOH Corporation
NDPS Client Library Version 1.5
Print Driver Download Was Successfully Tested On Windows 2000
Print Driver Download Was Successfully Tested On Windows 9X
Print Driver Download Was Successfully Tested On Windows NT4
Qserver-Mode printer used during testing: infotec 4353 MF by RICOH Corporation
Remote (RP) printer used during testing: infotec 4353 MF by RICOH Corporation
Tested with BROKER.NLM Version 3.0 Revision c
Tested with NDPSM.NLM Version 3.0 Revision c
This product was not tested on Novell Cluster Services

The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Danka Business Systems PLC
Master House
107 Hammersmith Road
London W140QH
ENGLAND
Voice: 020-7603-1515
Website: www.danka.co.uk